[Verified] Launched free software to remove CPRM for Windows 10!
Summary: Have you ever recorded a TV program or other program on DVD and tried to watch it on your computer, but could not play it back? This is because your playback software does not support CPRM. But don't worry, once the CPRM is removed, you will be able to watch the DVD on your computer. We will also introduce you to playback software that supports CPRM.
Table of Contents
- Two ways to play CPRM discs
- How to playback after removing CPRM
CPRM is an acronym for "Content Protection for Recordable Media". It is a type of copyright protection technology, a system that allows recording only once. Specifically, you first record a program and dub it to a CPRM-compatible DVD. Up to this point, there is no problem. However, if you try to further copy this CPRM-enabled DVD, the VRO extension in the DVD will be protected by CPRM. It will not be playable on ordinary media players. In this way, the copyright will be protected.
If your computer's DVD software does not support CPRM, the copy control signal will prevent playback. In this case, an error message such as "Disc not compatible with playback software" will appear and you should not be able to play it.
If your DVD software does not support CPRM discs, you will not be able to play them as they are. However, you can make it playable by changing the way you do things. There are two main approaches.
The first method is to install a CPRM-compatible playback device and playback software, which can be done by preparing a CPRM-compatible external DVD drive and playing the DVD from here. In this case, you must purchase a CPRM-compatible dorabe. It will be difficult to play it back for free.
If a DVD has CPRM protection, it is one way to remove it and play it. Then, change the file extension to one that is more versatile. In this case, the DVD can be viewed not only on a computer, but also on other devices such as smartphones and tablet devices.
To play a CPRM-protected DVD disc, you must first remove the CPRM guard. There are various software packages available that can do such removal. Among them, we have picked up some free software that is compatible with Windows 10.
DVDFab DVD Copy can remove not only CPRM, but also CSS, UOPs, APS, RC (region code), DADC, Disney's Fake, AV copy protections, Cinavia, etc. It can also convert CPRM DVD to ISO file. You can also change CPRM DVDs to ISO files or burn them to blank discs. It is the best DVD copy software. This software offers a 30-day full-featured free trial, so take advantage of it and playback CPRM.
Play CPRM with DVDFab DVD Copy Software to play CPRM using DVDFab DVD Copy Software How to do
Click the free download button above, the installer will start automatically. Wait for a while for the software to install. Then launch the software and you should see the top screen as shown below.
In this window, click on "Copy" in the upper left corner. Then several menus will appear at the bottom. Among these, select "Clone/Writing Mode.
Next, insert the target DVD into the optical drive. The software will then automatically read the disc information. When the reading is complete, the data about the DVD will be displayed.
At the bottom, choose where you would like to save the output files. When all settings are complete, click the "Start" button in the lower right corner.
The process will then proceed. At this point, you will see a progress indicator on the screen showing how much further along the process is.
If the copying process is complete and you want to burn a different disc, insert a blank DVD into your optical drive.
If you want to know more about how to use DVDFab, please refer to this article.
DVDFab Passkey for DVD can remove well-known DVD copy protections such as CPRM, RC, RCE, APS, UOPs, ARccOS, RipGuard, etc., including recorded DVD discs. It is often referred to as the "best" among all DVD copy protection removers. This DVD copy guard removal software is a Windows-based driver that works on the fly and never stops updating to keep up with the latest DVD protections, providing users with the latest decryption techniques, changes, features, or fixes. Use it here to play CPRM.
Play CPRM using DVDFab Passkey for DVD software How to do
Go to the official website or click the free download button above and install the software. After the installation is complete, you should see the following screen. Click on the "Start Now" section at the bottom of this screen.
Then insert the target DVD into the drive. The following screen will then appear and CPRM removal will be performed automatically.
If the CPRM is removed without any problems, the block on the "Information" screen will turn green as shown below. Below that, you will see a series of alphabetic characters, which is information about the DVD media and the copy protection that has been removed.
Next, perform the ripping: right-click on the DVDFab Passkey icon and select either "Rip to hard disk" or "Rip to image file". When ripping to hard disk, choose where to save the file and click the "Rip" button, and it will be saved to the specified location.
By the way, the above two software are for DVD Copy windows10.
CPRMDecrypter is a free software to remove CPRM. It is not so heavy software, so there is little load on your PC and you don't have to worry about the operation suddenly becoming heavy.
However, it is not recommended for beginners because it is somewhat complicated to operate. In addition, there are not many cases of failed download patterns or errors, but we will try to use the software with your consideration.
How to play CPRM using CPRMDecrypter software
Download the software from the download site: https://ux.getuploader.com/2513/にアクセスして. Click on CPRM Decrypter.exe. You should then see a screen similar to the one below.
There is a "Download" button at the bottom, click here. CPRMDecrypter will then be downloaded automatically and the following screen will appear.
When this screen appears, insert the target CPRM DVD disc into the drive. Set the drive and output destination folder.
Further down, there will be a section called "c2dec settings". By default, there will be four checkboxes on the left half: Enable c2dec, Remove video control information [R value], Remove audio control information [C value], and Set screen ratio [W value] to 16:9. Of these, you may want to uncheck "Remove voice control information [C value]" and check the next one, "Do not remove voice control information [C value]".
When all settings are complete, there will be an item further down that says "CPRM" and has a disc and drive symbol on it. Click here. When the process is complete, you will see the command prompt screen as shown below. The following capture shows the error message when the disk was not inserted.
When the exit message appears at the command prompt, press any key. The screen should then close.
The output file extension should be VRO. Change the extension to something like mpg for a generic video file. The target DVD will then be playable on your computer.
PowerDVD 21 Ultra is a CPRM playback software for Windows. It supports a variety of media files, including recorded discs, Ultra HD Blu-ray, and DVDs. Strictly speaking, this is not a CPRM removal tool. However, it is a software that can play content with CPRM protection technology. It is a form of CPRM playback after authenticating the Internet. It has been attracting attention because of its ability to play back high quality video and audio.
The free trial version has many limitations, but the purchased version is a must-have.
How to play CPRM using PowerDVD 21 Ultra software
Go to the official side: https://jp.cyberlink.comから and click on the button "Free Trial Version". Then the following installer should appear on your screen.
When the installation is complete, the following screen will appear. Click the "Start PowerDVD" button at the bottom to launch the software.
The language should remain in Japanese, first specify the location where you want to install the software, and then click "Next. Once you agree to the license agreement, the software will be installed automatically.
When the installation is complete, a screen similar to the one shown above should appear as the top screen. You can then use the software in the same way as you would use Windows' MediaPlayer. Simply place the disc in the optical drive and click the "Play" button on the screen to watch the video. 2.
WinDVD Pro 12 is a powerful DVD and Blu-ray player software. It offers beautiful playback of high-resolution video and 3D content, and provides cinema-like sound effects. The software also offers a wide range of features. For example, you can adjust color and brightness, capture screens, add subtitles, and perform noise reduction. It also has features to customize the video during playback, such as scene bookmarking, repeat playback, and slow-motion playback.
In addition, the AVCREC format is supported for comfortable playback of CPRM-compatible media. However, downloading and installing the CPRM pack is required for first-time playback, and an Internet environment is required.
If you get an error message when you try to play a DVD on your PC and it stops working, there is a good chance that CPRM is interfering. In this case, you can use the above mentioned software to remove CPRM and you will be able to play and watch the disc. All of them are available for free, especially DVDFab DVD Copy. Why not try installing it first? You can also use PowerDVD, WinDVD Pro 12, and other CPRM-compatible playback software.